Asuswrt-Merlin Changelog ======================== 386.12_4 (21-Nov-2023) - UPDATED: openvpn to 2.6.8 (fixes a crash introduced in 2.6.7) 386.12_2 (12-Nov-2023) - UPDATED: openssl to 1.1.1w. - UPDATED: curl to 8.4.0. - UPDATED: openvpn to 2.6.7. - FIXED: WPS not working on SDK6/SDK7 devices (affecting RT-AC68U and RT-AC88U/3100/5300) - FIXED: dcd constantly crashing (updated Trend Micro components) 386.12 (4-Sept-2023) - UPDATED: Merged with GPL 386_51997. - UPDATED: curl to 8.1.2. - UPDATED: OpenVPN to 2.6.6. - UPDATED: openssl to 1.1.1u. - UPDATED: tor to 0.4.7.13. - CHANGED: FTP server will now only support strong ciphers in TLS mode. - FIXED: QOS Classification showing no Upload data on some WAN configurations. - FIXED: Radio temperature graphs weren't updating - FIXED: nvram usage reported on Sysinfo page was inaccurate as it included JFFS stored values. 386.11 (14-May-2023) - UPDATED: curl to 8.0.1. - UPDATED: openvpn to 2.6.3. - CHANGED: Reduce max OpenVPN clients to 2 for RT-AC68U and DSL-AC68U due to lack of NVRAM on these two models. Note that existing settings are not automatically removed, you must run the following command over SSH to remove them from nvram and the /jffs/openvpn/ directory: clear_vpnclients.sh A backup will be saved in /jffs/openvpn_backup.tgz. - FIXED: DDNS was being refreshed every time IPv6 bound6() event occured even if IPv6 DDNS update was disabled. - FIXED: Wireless Log wouldn't properly show IPv6 address for clients with multiple addresses. - FIXED: dnsmasq may crash if no DNS server is configured (fix backported from dnsmasq upstream) 386.10 (10-Mar-2023) - NOTE: 386_xx releases are only for Wifi 5 (AC) models. - NEW: Added Site Survey page under Network Tools tab. (RT-AC86U/GT-AC2900). - UPDATED: dnsmasq to 2.89. - UPDATED: openvpn to 2.6.0. - UPDATED: openssl to 1.1.1t. - UPDATED: miniupnpd to 2.3.3. - UPDATED: Asus security daemon updated to 2.0 engine (patch from Asus) - CHANGED: Moved WiFi Radar and Site Survey to the Network Tools tab - CHANGED: Disabled auto logout on System Log and Wireless Log pages. - CHANGED: Reduced EDNS packet size from 1280 to 1232 bytes in dnsmasq, to better work with some upstream servers not fully supporting EDNS0. - FIXED: NTP redirection wouldn`t work properly with Guest Network, removed redirection for these. - FIXED: Added missing Tools icon on ROG UI (icon contributed by Cody). - FIXED: RT-AC68U may crash when using Media Bridge mode with a specific SSID length (patch from Asus) 386.9 (6-Jan-2023) - NOTE: 386_xx release are only for Wifi 5 (802.11ac) models. - NEW: Merged with GPL 386_50757. - UPDATED: getdns/stubby to 1.7.2/0.4.2. - UPDATED: zlib to 1.2.12 + backports. - UPDATED: openssl to 1.1.1s. - UPDATED: inadyn to 2.10.0. - UPDATED: nettle to 3.8.1. - UPDATED: openvpn to 2.5.8. - UPDATED: dropbear to 2022.83. - UPDATED: dnsmasq to 2.88. - CHANGED: Rebranded DNSFilter as DNS Director. This will prevent confusion with the company sharing the same name, and also better describes what the feature does. - CHANGED: Setting an OpenVPN client to redirect all traffic while in "Exclusive" DNS mode will now force redirect ALL DNS traffic just like in VPN Director mode. While this will allow redirecting clients with hardcoded DNS servers, it also means that your whole LAN will lose the ability of doing local name resolution. It might be best to use VPN Director in that case to control which client should be involved in the DNS redirection, or use DNSFilter instead of Exclusive DNS mode. editing VPNDirector rules. - CHANGED: Switched generated self-signed certificate to an EC certificate. - CHANGED: Disabled DSS key support in Dropbear SSH. - FIXED: Wrong temperatures used by the temperature graphs (386.8 regression) - FIXED: Guest Network clients couldn't route through VPN (regression in 386.4 following a GPL merge). - FIXED: Clients connected to Guest Network 1 aren't redirected to the router's NTP if NTP interception is enabled. - FIXED: Name was truncated to 31 chars when enabling OpenVPN client's Server Certificate Name Validation. - FIXED: CVE-2022-37434 in zlib. - REMOVED: Interface selector on Speedtest page (no longer working, possibly due to an ookla client update) 386.8 (13-Aug-2022) - NOTE: This release is only available for the RT-AX88U as well as the two new models listed below. - NEW: Added support for the GT-AXE16000. - NEW: Added support for the GT-AX11000_Pro. - NEW: Added support for new RT-AX88U hardware revision. - UPDATED: Merged with GPL 386_49634. - CHANGED: Re-enabled IPv6 DDNS support. - CHANGED: Once again block router DNS access over IPv6 when using DNSFilter on a pre-HND model (reverted back to 386.7 behaviour for that scenario) - FIXED: inaccurate nvram usage on Sysinfo page for some HND models. Now accurately report kernel nvram usage. - FIXED: WiFi Radar page alignment. - FIXED: AiMesh node new firmware popup would use the device model (like RT-AC66U_B1) rather than the product id (like RT-AC68U) for the generated download URL. - FIXED: OVPN client with DNS set to strict had lower priority than DNSPrivacy servers. - FIXED: IPv6 DNS may be missing if DNSPrivacy is enabled. - FIXED: Wifi Radar pages missing on XT12. - FIXED: QRcode failing to generate if the SSID contained unicode characters (like emojis or other UTF8 entities) 386.7_2 (24-July-2022) - UPDATED: openssl to 1.1.1q. - UPDATED: RT-AX86U driver + SDK updated to latest upstream version - UPDATED: RT-AX88U and GT-AX11000 radio firmware downgraded to the previous version. - FIXED: Some ISPs would fail to allocate a proper IPv6 prefix (tvlz) - FIXED: Packet checksum errors logged when using DNSFilter in Router mode. Router mode will no longer use DNAT, except for newer HND 5.04 models like the GT-AX6000 or XT12, which work properly. Non-Router mode on HND will still use the new DNAT support added in 386.7. - FIXED: Some SSH clients would end up with an incorrect PATH value for the default search path. - FIXED: OpenVPN clients wouldn't get updated routing tables if an OpenVPN server was stopped/started while an OpenVPN client was connected 386.7 (22-June-2022) - NEW: IPV6 support for DNSFilter for HND router models. Custom settings can also let you specify IPv6 servers. These (as well as providers that support IPv6) will now also get intercepted and redirected like the IPv4 DNS servers are. - UPDATED: Merged with 386_49335 GPL for the RT-AC5300. - UPDATED: Merged with 386_48966 GPL for all other models. - UPDATED: openssl to 1.1.1o. - UPDATED: haveged to 1.9.18. - UPDATED: openvpn to 2.5.7. - UPDATED: tor to 0.4.7.8. - CHANGED: dhcpc-event now has a second parameter that will contain "4" or "6" depending on the IP protocol of the event (dave14305) - FIXED: JFFS backup/restore functions not working on XT12 and GT-AX6000. - FIXED: CVE-2022-0934 in dnsmasq (backport) - FIXED: CVE-2022-26376 (reported by Cisco Talos, fixed by Asus) - FIXED: DNSFilter client list was limited to around 10 clients on some models. - FIXED: AuraRGB could be re-enabled on reboot if it was previously disabled. - FIXED: Wifi LEDs wouldn't turn back on when re-enabling LEDs on the RT-AX86S. 386.6 (20-Apr-2022) - NOTE: This release is only available on the GT-AX6000 and XT12. - NEW: Added support for the GT-AX6000. - NEW: Added support for the ZenWifi Pro XT12. - NEW: Added Cloudflare and AdGuard to DNSFilter services. - NEW: Added option to enable/disable IPv6 support to OpenVPN server. This is disabled by default. - NEW: Added NAT support for OpenVPN server in IPv6 mode. This allows to redirect IPv6 Internet traffic through your OpenVPN server. - UPDATED: Merged with GPL 386_47885. - UPDATED: wget to 1.21.3. - UPDATED: dropbear to 2022.82. - CHANGED: Reworked DNSFilter page design. - CHANGED: Allow requesting bigger IPv6 subnets from your ISP (Tvlz) - CHANGED: Allow hostuniq PPPoE value of up to 256 characters long. - FIXED: Traditional QoS download traffic limited by upstream bandwidth (dave14305) 386.5_2 (25-March-2022) - UPDATED: openssl to 1.1.1n. - UPDATED: openvpn to 2.5.6. - CHANGED: Added Wireguard module + userspace tool to GT-AXE11000. - FIXED: Only a few DNSFilter clients are supported on HND models (entries limited to 255 chars). - FIXED: Security issue in AiCloud (backport from Asus) - FIXED: Cannot enable Adaptive QoS under certain scenarios on pre-HND router models. 386.5 (2-March-2022) - NEW: Added support for the RT-AC68U V4. All RT-AC68U models are using a combined firmware file (like stock firmware), with both firmwares within the same file. - NEW: Added support for the GT-AXE11000. - NEW: Added config option for the Boost key on GT models. The option can be found on the Administration -> System page. - NEW: Basic IPv6 support for TQoS (Kevin Bracey) - UPDATED: Merged with GPL 386_46065. - UPDATED: Reverted dnsmasq from 2.86 to 2.85. - UPDATED: miniupnpd to 2.3.0. - UPDATED: avahi to 0.8 + a few backports. - CHANGED: Improved accuracy of overhead parameters in Traditional QoS (Kevin Bracey) - CHANGED: Report download stats for TQoS (Kevin Bracey) - CHANGED: Report DFS scanning state for both 5 GHz bands if appropriate on tri-band models - CHANGED: Enabled pass_persist support in net-snmp. - FIXED: Various TQoS issues (Kevin Bracey) - FIXED: enabling/disabling 802.11b rates wouldn't get saved to nvram. - FIXED: netatalk failing to load extensions. - FIXED: Large swapfiles reported the incorrect size on the Tools page (Kevin Bracey) - FIXED: User accounts would not show as connected on the OpenVPN server username list if a remote client connected over IPv6. - FIXED: Earlier syslog content was missing on RT-AX86U and RT-AX68U after a reboot. - FIXED: WAN monitoring could fail if using IPv6 and DNS Rebind protection was enabled. - FIXED: RT-AX86U syslog could be truncated after a reboot. - FIXED: Toggling FTP WAN access without applying settings wouldn't reconfigure the FTP server properly. - FIXED: Non-functionning TrendMicro features on the RT-AX68U and RT-AX86U (reverted kernel components to the previous version). 386.4 (1-Jan-2022) - NEW: Added support for the RT-AX86S (uses the same firmware as the RT-AX86U). - NEW: Added wireguard kernel module + userspace tool to HND models firmware images. - NEW: IPv6 support for OpenVPN server. Allows to remotely connect to your router's OpenVPN server over IPv6, and reach LAN clients over their IPv6 (redirecting IPv6 Internet traffic does not work). - UPDATED: Merged with GPL 386_45958 + a few newer patches from Asus. - UPDATED: curl to 7.79.1. - UPDATED: vsftpd to 3.0.5. - UPDATED: openssl to 1.1.1m. - UPDATED: wget to 1.21.1. - UPDATED: nettle to 3.7.3. - UPDATED: dnsmasq to 2.86. - UPDATED: openvpn to 2.5.5. - UPDATED: tor to 0.4.5.11. - UPDATED: miniupnpd to 2.2.3-git 20211017. - UPDATED: inadyn to 2.9.1. - UPDATED: CA bundle to 2021-12-13. - UPDATED: amtm to 3.2.2 (thelonelycoder) - CHANGED: replaced jitterentropy-rngd with haveged. It uses more resources, but it works properly on older platforms, and is generally less CPU intensive in regular use. This is implemented for all router models. - CHANGED: Switched dnsmasq crypto backend to nettle. - CHANGED: Switched to Asus's own dhcp hostname support. Existing dhcp_hostnames entries will be converted on first boot. - CHANGED: miniupnpd will now be supplied the public WAN IP to improve compatibility with dual NAT setups. - CHANGED: Disabling Auto DoH will now also disable Windows' new Discovery of Designated Resolvers (DDR) feature. - FIXED: Wrong interface might be used for the default gateway in an openvpn client routing table. - FIXED: Generated OpenVPN certs used SHA1 signatures instead of SHA256 (regression from 386.1) - FIXED: Various issues with protocol handling when importing an ovpn client file. - FIXED: IPv6 not working while in Dual WAN mode. - FIXED: Failed OpenVPN client connections might sometime be stuck with a "Connecting" state. - FIXED: NTP sometimes failing to update at boot time when using IPv6. - FIXED: Changes done by firewall-start may be lost after ddns service gets stopped when using tunnelbroker 386.3_2 (6-Aug-2021) - NOTE: closed down the Issue tracker on Github, as 90% of it was people asking for technical support, or failing to use the supplied submission form. - CHANGED: Re-disabled jitterentropy-rngd on non-HND models. It kept using CPU time every two seconds and had a very marginal impact on the entropy pool (which it never could push above the target threshold of 1024). - CHANGED: Moved the "Redirect Internet traffic" setting on the OpenVPN Client page to the Network Settings section to increase its visibility, as too many users are forgetting to configure it. - CHANGED: Display "Internet traffic not redirected" instead of "Public IP Unknown" on the OpenVPN Client status display when Redirect Internet traffic is set to "No". - FIXED: Only the first OpenVPN client would be used if you had multiple clients connected and the first one had a Redirect Internet set to "No". Now, setting this to "No" means that client's routing table will no longer get a default gateway configured, allowing traffic to be processed by other RPDB tables if there wasn't a matching route within that client's table. - FIXED: IPV6-compatible DNSFilter servers weren't properly configured in dnsmasq. - FIXED: DNSFilter client rules may get corrupted after a reboot. 386.3 (23-July-2021) - NOTE: First time you boot into this version, you need to either shift-reload the main index page, or clear your browser cache. - NEW: Introducing VPN Director, which replaces the original policy routing management interface for OpenVPN clients. A bit similar to Asus's own VPN Fusion, OpenVPN routing rules are now managed through a central web interface, and they are stored in JFFS instead of nvram, to allow creating more rules, and free up some nvram for nvram-limited devices such as the RT-AC68U. See the Wiki for more information. - NEW: Added QR codes to the networkmap as well as the Guest Network page, to allow easily connecting a mobile device just by scanning the QR code. The generated QR code can also be saved as a file if you'd like to print it. - CHANGED: Rewrote OpenVPN routing handling. The firmware will now handle route creation itself rather than letting the openvpn client create/remove routes. The new implementation brings a few changes: - "Force Internet traffic through tunnel" can now be set to "No", "Yes (All)" or "VPN Director". - This setting will now override whatever setting pushed by the server regarding gateway redirection. - The kill switch can now be used in both "Yes" and "VPN Director" routing modes - Manually stopping a client will remove the kill switch. It will now only be applied at boot time (if client was set to start at boot), or if the tunnel is disconnected through a non-user event - CHANGED: Reworked OpenVPN's DNS Exclusive mode implementation and interaction with dnsmasq. - CHANGED: Moved OpenVPN Custom settings content to JFFS, and increased max storage length from around 350 chars to 4095 chars. - CHANGED: Added support for BCM50991 used for the 2.5G interface in newer RT-AX86U revisions. - UPDATED: nano to 5.7. - UPDATED: curl to 7.76.1. - UPDATED: dnsmasq to 2.85-openssl. - UPDATED: openvpn to 2.5.3. - UPDATED: getdns to 1.7.0. - UPDATED: stubby to 0.4.0. - FIXED: Setting an OpenVPN client's DNS mode to Exclusive could fail to work for certain configurations - FIXED: DNS Exclusive redirections applied in Policy mode could be executed in the wrong order if you had overlapping policy rules in two separate clients. - FIXED: Clients connected to Guest Network 1 couldn't be routed through an OpenVPN tunnel. - FIXED: Clients connected to Guest Network 1 would bypass DNSFilter rules. - FIXED: USB disks not properly unmounted on reboot on some router models. - FIXED: Missing error report on OpenVPN client connection failure - FIXED: profile.add getting used even if JFFS scripting was disabled (dave14305) - FIXED: Freedns authentication errors would not properly be reported as errors. 386.2_6 (6-June-2021) - NOTE: The IRC channel, #asuswrt, has moved to the Libera IRC network (https://libera.chat/). - UPDATED: chart.js to 2.9.4. - UPDATED: tor to 0.4.5.8. - UPDATED: root certificate bundle to June 5th 2021. - FIXED: Fragattack security issues 386.2_4 (30-Apr-2021) - NEW: Added jitterentropy-rngd to non-HND models, in addition to HND models. - UPDATED: OpenVPN to 2.5.2. - UPDATED: jitterentropy-rngd to 1.2.2 (library 3.0.3) - FIXED: Scheduled new FW checks wouldn't display the webui notification icon when the local router had a new release available. - FIXED: OpenVPN server would flip into an error state (being shown as "initializing" on the webui) whenever an inbound client failed to connect to it. 386.2_2 (13-Apr-2021) - FIXED: IPv6 pings were blocked if sent below the rate limit instead of above (issue introduced in 42095) - FIXED: kernel debuging log entry (was removed) (RT-AC86U) - FIXED: Field that accepted a float value would reject values equal to the allowed minimum (for example the QoS bandwidth limits) - FIXED: QoS Bandwidth settings were hidden on non-HND models when accessing the QoS page. - CHANGED: Tweaks to the Firmware Upgrade page display. - CHANGED: Enabling DOS protection will now also rate limit ICMPV6 echo (type 128) packets, like with IPv4. 386.2 (2-Apr-2021) - NOTE: due to changes in how custom device icons are handled, first time you boot with 386.2 you need to either shift-reload the main index page, or clear your browser cache. - NEW: Added support for the GT-AX11000. Note that VPN Fusion, as well as the ROG-specific features such as the custom UI are not supported. - NEW: Added support for the RT-AX68U. - NEW: Added jitterentropy-rngd daemon to HND routers. This will ensure sufficient entropy is generated early on at boot time, reducing boot stalls caused by insufficient entropy for the kernel's random number generator, and also generally improves security related to crypto operations by the router. - NEW: Added Cake QoS for HND routers. Note that just like Traditional QoS, this is not compatible with hardware acceleration, and therefore might not be usable on connections faster than around 350 Mbps (may vary based on router models). - UPDATED: Merged GPL 386_42095. - UPDATED: Openssl to 1.1.1k. - UPDATED: OpenVPN to 2.5.1. - UPDATED: iproute2 to 5.11.0 (HND models). - UPDATED: root certificate bundle to March 9th 2021. - CHANGED: qos-start "init" user script now runs in blocking mode to ensure it's able to complete any changes it may apply to qos configs before these configs get applied. - FIXED: Router could get stuck at boot time after the user migrated from stock firmware, or just erased his JFFS partition, requiring a factory default reset. - FIXED: ATM checkbox could not be enabled on QOS page. - FIXED: DST not getting applied to some timezones (snauton) - FIXED: Traditional QoS was broken in 386.1 (dave14305) - FIXED: Connected IPSEC clients weren't shown on the VPN Status page. - FIXED: Userspace conntrack tool was no longer working - FIXED: Traffic Monitor spikes for HND models. (Asus backport) - FIXED: webui incorrectly complaining about mismatched timezone between browser and webui for some timezones (dave14305) - REMOVED: SSH Brute Force Protection option (already handled by Asuswrt's protect service daemon) 386.1_2 (12-Feb-2021) - NEW: Added snmp support to the RT-AX86U. - UPDATED: inadyn to 2.8.1. - UPDATED: nano to 5.5. - CHANGED: Use local OUI database instead of remote one hosted on Asus's server (allows queries to work even when accessing webui over https) - CHANGED: If dropbear cannot create keys in /jffs then create temporary ones in /etc so SSH can work even without a working JFFS partition. - FIXED: Missing Game Mode on RT-AC88U - FIXED: Non-working 160 MHz settings for RT-AC88U region/versions that should support it - FIXED: Missing Instant Guard to RT-AX56U and RT-AC88U. - FIXED: IPv6 ending with "::" were considered invalid on the webui (was breaking the Prefix field on the 6in4 tunnel page for instance). - FIXED: OUI lookups on site survey page not working (for non-HND models) - FIXED: Wifi Radar missing on GT-AC2900 - FIXED: Netools-enabled pages not used by GT-AC2900 and RT-AX86U - FIXED: GeForce NOW UPNP not working - FIXED: Erasing the JFFS partition would often require a second reboot since the operation failed when encountering a bad block. These are now properly skipped. - FIXED: Parental Control's time scheduler not working properly. 386.1 (30-Jan-2021) Switched to the new 386 codebase. 386 introduces AiMesh 2.0, finalizes the move to OpenSSL 1.1.1 firmware-wide, adds a new speedtest (powered by Ookla). For more details, please refer to Asus's own release notes. - NOTE: For developers, note that firmware code is once again back on the master branch, with both mainline and ax being reunified again. - NOTE: Some users upgrading might have to go through some database maintenance on first boot, which means the router might be slower or have a non-responsive webui for a while. This can take anywhere from 5 minutes up to an hour, depending on your model, just give it time to complete the process. - NEW: Added support for the RT-AX86U. - NEW: Added support for the GT-AC2900, with a few restrictions: - Non-ROG UI is used - VPN Fusion is not supported - A few other ROG-specific features are not supported This is an experiment done in collaboration with Asus. - NEW: Added support for the RT-AC68U V3. - NEW: Added stub and stub-v2 compression options to OpenVPN clients. Not added to server, since compression is considered deprecated, and will be removed most likely in OpenVPN 2.6, for security reasons. - NEW: Added tls-crypt-v2 support to OpenVPN clients. - NEW: Added option to select an OpenVPN client when running Oookla Speedtest. - UPDATED: Merged GPL 386_41700 - UPDATED: Openssl to 1.1.1i. - UPDATED: Updated to OpenVPN 2.5.0. Note that OpenVPN 2.4.0 or newer is now required by the exported client config file. You can still manually configure an older client to connect with your router. - UPDATED: dnsmasq to 2.84, resolving CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25687, CVE-2020-25684, CVE-2020-25685 and CVE-2020-25686 aka DNSpooq (themiron) - UPDATED: nano to 5.2. - UPDATED: curl to 7.72.0. - UPDATED: zlib to 1.2.11. - UPDATED: lz4 to 1.9.2. - UPDATED: e2fsprogs to 1.45.6. - UPDATED: dropbear to 2020.81. - UPDATED: miniupnpd to 2.2 (git snapshot from 20201129) - UPDATED: Switched userspace ipset from 6.32 to 7.6 (to match with upstream) - CHANGED: firmware update checks are no longer using the server address stored in nvram, for security reasons. Devs who were using that nvram should instead edit the webs_scripts/* to use their own URL. - CHANGED: The old legacy cipher setting in OpenVPN is now only available when running with static key authentication. - CHANGED: Tweaks to the OpenVPN webui layout - CHANGED: OpenVPN clients will now NAT all outbound traffic, regardless of the source subnet. - CHANGED: Reworked the display of DNSPrivacy presets - CHANGED: Added AdGuard (ad blocking) and CIRA Canadian Shield (non US-based service) to the DNSPrivacy presets. - CHANGED: At boot time, OpenVPN killswitch will only be applied for clients set to auto-start with WAN. - CHANGED: Increased number of available mount points for addon webpages to 20. - CHANGED: Multiple routes can now be defined per client on the OpenVPN client-specific configuration. - CHANGED: Improved NAT acceleration report for newer models on the sysinfo page. Now query the hardware for the current state instead of reporting the nvram values. - CHANGED: When logging allowed connections is enabled, also log outbound LAN connections (reverts to the behaviour from a few years ago) - FIXED: DHCP could fail to renew its lease with some ISPs when Trend Micro engine was enabled (workaround provided by Asus) - FIXED: OpenVPN client remote IP wasn't updated on client stop/restart. - FIXED: Couldn't force generating a new SSL certificate for the webui. - REMOVED: Option to disable NCP. The NCP cipher list is now used both for NCP and non-NCP endpoints. - REMOVED: fq_codel support for Adaptive QoS. Due to a change in how Trend Micro configures QoS, it is no longer possible to intercept these to inject fq_codel. - REMOVED: Option to select sfq as a queue scheduler for t.QoS or Bandwidth Limiter, and always use fq_codel. - REMOVED: Support for the Cloudcheck mobile app. 384.19 (14-Aug-2020) - NOTE: Due to flash partitioning changes done by Asus, it is strongly recommended to make a backup of your JFFS partition before upgrading the RT-AC86U, and restoring that backup afterward. If you run into issues, reformat your JFFS partition and reboot. - NOTE: The RT-AX56U build is not available for this release. - NEW: Added support for static routes for PPTP/L2TP VPN clients, on the Static Route page (themiron) - NEW: Added notification when JFFS free space drops below 3 MB. - UPDATED: Merged GPL 384_9354 for AX models. - UPDATED: Merged GPL 384_81992 for mainline models. - UPDATED: Merged SDK + binary blobs 384_9354 for RT-AX58U. - UPDATED: Merged SDK + binary blobs 384_9107 for RT_AX88U. - UPDATED: Merged binary blobs + SDK 384_81981 for RT_AC5300. - UPDATED: Merged binary blobs + SDK 384_81992 for RT-AC86U. - UPDATED: Merged bwdpi components from 385_20630 firmware image for RT-AC68U. - UPDATED: dnsmasq to 2.82-openssl (themiron) - CHANGED: Rewrote a large portion of the OpenVPN implementation, to make the code easier to maintain. The new libovpn code is released under a GPL licence. Functionality should largely remain the same. - CHANGED: Replaced updown-*.sh OpenVPN event handler scripts with binary libovpn functions. The new code does stricter validation of the configuration. - CHANGED: Enabling Client Config Dir (ccd) for an OpenVPN server in non-exclusive mode will no longer accept duplicate common names (to prevent issues with two clients trying to share the same settings). If you need such an unusual setup, you should enable "Username/Password auth only", which will make the common name become the username. Or better, ensure that you have unique certificates for all of your users. - CHANGED: Removed the (undocumented) vpn_debug setting. Debug logging will now only come from OpenVPN itself (configurable through the log verbosity setting). - CHANGED: Improved mechanism for providing an available mount point for addon API scripters (dave14305) - CHANGED: Harmonized the various SSL certificate modes with upstream. 0-None - will be self-generated 1-Imported - lets you upload your own (no longer self generated unless you don't upload one) 2-Let's Encrypt (unchanged) Self-generated cert will be stored to /jffs/cert.tgz, just like upstream. - FIXED: Broken French webui on AX models (fixed with Asus's GPL update) - FIXED: Chacha20 wasn't prioritized for bcm675x models which lacked AES acceleration (RT-AX56U and RT-AX58U) - FIXED: ddns updates and OpenVPN instances might be launched twice at boot time if the initial ntp clock sync happened too fast. - FIXED: Enforced DNS and tQoS fix would be lost when the firewall gets restarted while an OpenVPN client is running. - FIXED: Various issues surrounding error state report when an OpenVPN client failed to start properly. - FIXED: WINS provided by an OpenVPN server weren't properly used. - FIXED: Some large DNS queries could fail when using DoT (patch backported from upstream) 384.18 (28-June-2020) - NOTE: A number of changes for some models are not backward compatible with previous versions. Downgrading to a previous release will require a factory default reset afterward in many cases. - UPDATED: Merged GPL 384_8563 for AX models. - UPDATED: Merged GPL 384_81918 for mainline models. - UPDATED: Merged SDK + binary blobs 384_81918 for RT-AC86U. - UPDATED: Merged SDK + binary blobs 384_81902 for RT-AC5300. - UPDATED: Merged SDK + binary blobs 385_20490 for RT-AC68U. - UPDATED: Merged binary blobs 385_20490 for RT-AC3100. - UPDATED: Merged binary blobs 384_81918 for RT-AC88U. - UPDATED: Merged SDK + binary blobs 384_8563 for RT-AX58U. - UPDATED: amtm to 3.1.7. - UPDATED: Root certificate bundle to June 3rd 2020. - UPDATED: OUI database used by the webui. - UPDATED: Dropbear 2020.80 (themiron) - UPDATED: nano to 4.9.3. - CHANGED: Optimized OpenVPN routing policy storage (this change is NOT backward compatible with previous firmwares) - FIXED: ssh/scp client would fail to connect while negotiating a chacha20 connection (themiron) 384.13_10 (28-June-2020) This release will most likely be the last release for the RT-AC87U and RT-AC3200, due to limited upstream support. - UPDATED: amtm to 3.1.7. - UPDATED: Root certificate bundle to June 3rd 2020. - UPDATED: OUI database used by the webui. - UPDATED: Dropbear 2020.80 (themiron) - UPDATED: Wireless driver from 382_52230 for RT-AC87U and RT-AC3200 (should in theory address Kr00k) - FIXED: ssh/scp client would fail to connect while negotiating a chacha20 connection (themiron) 384.17 (26-Apr-2020) Updating some models (like the RT-AC88U) from stock firmware 220.127.116.11.384_81790 and newer will require a factory default reset after flashing Asuswrt-Merlin, due to a change in how Asus stores the admin password starting with 384_81790. - NEW: Add Chacha20-poly1305 support to dropbear (themiron) - UPDATED: dnsmasq to 2.81-openssl (themiron) - UPDATED: openvpn to 2.4.9. - UPDATED: curl to 7.69.1. - UPDATED: openssl-1.1 to 1.1.1g (themiron) - UPDATED: nano to 4.9.2. - FIXED: RT-AC88U/RT-AC3100/RT-AC5300 could fail to upgrade from newer stock versions to Asuswrt-Merlin. - FIXED: Various webui issues with sorting DHCP reservations. 384.13_8 (26-Apr-2020) This release is only available for the RT-AC87U and RT-AC3200. - UPDATED: dnsmasq to 2.81-openssl (themiron) - UPDATED: openvpn to 2.4.9. - UPDATED: openssl-1.1 to 1.1.1g (themiron) 384.16 (5-Apr-2020) - NEW: Added support for the RT-AX58U and RT-AX3000 (same firmware), based on GPL 384_8253 + binary blobs 384_8137. - NEW: Added support for the RT-AX56U, based on GPL + binary blobs from 384_8253. - NOTE: The RT-AC87U and RT-AC3200 are now officially considered to be on limited support. The future for these two models will depend on Asus's own support in the coming months. - NEW: Added ed25519 support in Dropbear (themiron) - UPDATED: Merged GPL 384_8253 for AX models. - UPDATED: Merged SDK + binary blobs 384_7977 for RT-AX88U. - UPDATED: Merged SDK + binary blobs 384_81352 for RT-AC86U. - UPDATED: Tor to 0.4.2.6. - UPDATED: curl to 7.68.0. - UPDATED: nano to 4.8. - UPDATED: dnsmasq to 2.81rc4-33-g7558f2b-openssl (themiron) - UPDATED: inadyn to 2.7 (themiron, merlin) - UPDATED: getdns to 1.6.0 (themiron) - UPDATED: stubby to 0.3.0 (themiron) - UPDATED: amtm to 3.1.6 (thelonelycoder) - UPDATED: openssl-1.1 to 1.1.1f (themiron, merlin) - UPDATED: Chart.js to 2.9.3 - CHANGED: Wireless Log page will now regroup Guest Network clients together and identify which guest instance they are connected to. - CHANGED: Report temperature of second 5 GHz radio on Sysinfo page for tri-band models. - CHANGED: Added down/upload monitor to network status page, and removed useless RAM chart to free some space. - CHANGED: Security hardening in dropbear dropped CBC and 3DES ciphers, removed version disclosure from ident string (themiron) - FIXED: DNS server was unreachable when connecting to an OpenVPN server with Advertise DNS enabled, due to firewall rules. - FIXED: Router Security Assessment would fail to recognize WPA3 as being secure. - FIXED: miniupnpd would reject private WAN IPs - changed that upstream behaviour to allow these. - FIXED: Would require you to reset the DHCP scope if you changed the LAN hostname. - FIXED: Couldn't set http mode to http-only if you previously had WAN access enabled but have since switched to non-router mode. - FIXED: Disks with a single quote in their name would fail to properly list on various USB service pages. - FIXED: CVE-2020-8597 security issue. 384.13_6 (5-Apr-2020) This release is only available for the RT-AC87U and RT-AC3200. These two models are now considered to be on limited support, and their future will depend on Asus's future support for these two. - UPDATED: openssl-1.1 to 1.1.1f (themiron, merlin) - UPDATED: amtm to 3.1.6 (thelonelycoder) - CHANGED: Security hardening in dropbear: dropped CBC and 3DES ciphers, removed version disclosure from ident string (themiron) - FIXED: DNS server was unreachable when connecting to an OpenVPN server with Advertise DNS enabled, due to firewall rules. - FIXED: miniupnpd would reject private WAN IPs - changed that upstream behaviour to allow these. - FIXED: Would require you to reset the DHCP scope if you changed the LAN hostname. - FIXED: Couldn't set http mode to http-only if you previously had WAN access enabled but have since switched to non-router mode. - FIXED: Disks with a single quote in their name would fail to properly list on various USB service pages. - FIXED: CVE-2020-8597. 384.15 (8-Feb-2020) The RT-AC87U and RT-AC3200 are not supported by this release, see the 384.13_4 release released separately for these two models. - NEW: wan-event script. The first parameter will be the WAN unit (0 for first WAN, 1 for secondary). The second parameter will be a string describing the type of event (init, connected, etc...). A wan-event of type "connected" will be identical to when the original wan-start script was being run (wan-start should be considered deprecated and will be removed in a future release) - NEW: Implemented an official API for addon developers to better integrate with the router. This includes up to ten different pages that can be added anywhere within the webui, and a dedicated storage repository for your settings, which can be interacted with through your custom web page or through a shell script. See the Wiki for more information: https://github.com/RMerl/asuswrt-merlin/wiki/Addons-API - NEW: amtm (Asuswrt-Merlin Terminal Menu) by thelonelycoder has been added to the firmware. Running "amtm" over SSH will give you a menu allowing you to select and install various addons, such as Diversion (ad blocker) or SKynet (an advanced firewall extension). The plugins for amtm are still maintained by its original author (thelonelycoder). https://github.com/RMerl/asuswrt-merlin/wiki/AMTM - UPDATED: Backported some fixes from 384_81981, mostly related to WAN, port bonding and mdns. - UPDATED: Merged GPL 384_7756 for RT-AX88U, which adds OFDMA and WPA3 support to that model. - UPDATED: Merged with GPL 385_10002 for other models (from RT-AC68U) - UPDATED: odhcp6c to 1.1-97-ge199804 (themiron) - UPDATED: curl to 7.67.0. - UPDATED: openssl-1.0 to 1.0.2u - UPDATED: dnsmasq to 2.80-114-ge40d8be (themiron) - CHANGED: Replaced entware-setup.sh script with link to amtm, as using the amtm Entware installer is now the supported method. - CHANGED: Improved connection handling in httpd (themiron) - FIXED: Some of the newest DNSFilter servers weren't properly set up with IPv6 (dave14305) 384.13_4 (8-Feb-2020) This release is only available for the RT-AC87U and RT-AC3200. - NEW: wan-event script. The first parameter will be the WAN unit (0 for first WAN, 1 for secondary). The second parameter will be a string describing the type of event (init, connected, etc...). A wan-event of type "connected" will be identical to when the original wan-start script was being run (wan-start should be considered deprecated and will be removed in a future release) - NEW: Implemented an official API for addon developers to better integrate with the router. This includes up to ten different pages that can be added anywhere within the webui, and a dedicated storage repository for your settings, which can be interacted with through your custom web page or through a shell script. See the Wiki for more information: https://github.com/RMerl/asuswrt-merlin/wiki/Addons-API - NEW: amtm (Asuswrt-Merlin Terminal Menu) by thelonelycoder has been added to the firmware. Running "amtm" over SSH will give you a menu allowing you to select and install various addons, such as Diversion (ad blocker) or SKynet (an advanced firewall extension). The plugins for amtm are still maintained by its original author (thelonelycoder). https://github.com/RMerl/asuswrt-merlin/wiki/AMTM - UPDATED: odhcp6c to 1.1-97-ge199804 (themiron) - UPDATED: openssl-1.0 to 1.0.2u - UPDATED: curl to 7.67.0. - UPDATED: OpenVPN to 2.4.8. - UPDATED: dnsmasq to 2.80-114-ge40d8be (themiron) - CHANGED: Replaced entware-setup.sh script with link to amtm, as using the amtm Entware installer is now the supported method. - CHANGED: Improved connection handling in httpd (themiron) - FIXED: Some of the newest DNSFilter servers weren't properly set up with IPv6 (dave14305) 384.14_2 (1-1-2020) - FIXED: Missing cifs kernel module - FIXED: stubby was linked with OpenSSL 1.0 instead of 1.1 - FIXED: some routers were reporting the Internet connection being disconnected. If you were affected and you had flashed a customized bootloader, then please reflash your original bootloader, as your modded bootloader is invalid, and other potential issues may appear over time. - FIXED: Random traffic spikes logged in Traffic Monitor (regression from 384_81351) 384.14 (14-Dec-2019) - NEW: Implement option to prevent Firefox's automatic usage of DoH. By default, this will only apply if you have DNSPrivacy enabled, or if you have DNSFilter enabled with a global filter, to ensure that Firefox will not bypass either of these. You can also have this override applied all the time, or completely disable it. - NEW: Added "split" busybox applet. - NEW: Added IPv6 support to Network Analysis webui - NOTE: You might need to reconfigure your device hostname on the LAN -> LAN IP page due to a GPL-level change (exclusing the RT-AX88U) - UPDATED: RT-AX88U to GPL 384_6436 (with Let's Encrypt fixes backported from 384_81351) - UPDATED: RT-AC68U, RT-AC86U to GPL 384_81351 - UPDATED: RT-AC88U, RT-AC3100 to GPL 384_81351 and binary blobs from 384_81116 - UPDATED: RT-AC5300 to GPL 384_81351 and binary blobs from 384_81219. - UPDATED: miniupnpd 20190824 - UPDATED: dnsmasq 2.80-95-g1aef66b (themiron) - UPDATED: OpenSSL 1.0.2 to 1.0.2t (themiron) - UPDATED: OpenSSL 1.1.1 to 1.1.1d (themiron) - UPDATED: Curl 7.66.0 - UPDATED: nano 4.4 - UPDATED: OpenVPN 2.4.8 - UPDATED: OUI database to 2018-08-17 version - UPDATED: CA root certificates to October 9th 2019 - CHANGED: Made webui SSL certificate generation compliant with IOS 13 and MacOS 10.15 new requirements. - CHANGED: Rewrote the faketc script used to inject Codel into Adaptive QoS as a C program for improved performance. - CHANGED: Moved /usr/bin/ip to /usr/sbin/ip on the RT-AC86U and RT-AX88U to match other models. - CHANGED: IPv6 firewall now accepts empty values for local IP (which means any local IP). - FIXED: Webui wouldn't notify when running dangerously low on free nvram (feature was lost at some point in the past) - FIXED: Non-working link to YandexDNS on the webui for Russian models. - FIXED: Backported various httpd fixes to RT-AX88 from other models. - FIXED: Custom clientlist would be wiped if stopping an OpenVPN server instance. - FIXED: Incorrect detection of EUI64 addresses on the IPv6 firewall (would prevent using ::/0 for instance). - FIXED: EUI64 support missing while in Load Balancing or using Multicast IPTV. - FIXED: Asus DDNS failing to update due to an invalid certificate on Asus's server. - FIXED: Let's Encrypt support would sometime fail when using Asus DDNS (fixed DNS publishing of validation record) (in addition to general failure fixed by GPL 81351) - FIXED: IPv6 neighbour solicitation drop toggle not working for some models - FIXED: openvpn-event scripts would be executed even if custom scripts were globally disabled 384.13_2 (14-Dec-2019) This release is only available for the RT-AC87U and RT-AC3200. - NEW: Added "split" busybox applet. - UPDATED: OpenSSL 1.0.2 to 1.0.2t (themiron) - UPDATED: OpenSSL 1.1.1 to 1.1.1d (themiron) - UPDATED: CA root certificates to October 9th 2019 - CHANGED: Rewrote the faketc script used to inject Codel into Adaptive QoS as a C program for improved performance. - CHANGED: Made webui SSL certificate generation compliant with IOS 13 and MacOS 10.15 new requirements. - CHANGED: IPv6 firewall now accepts empty values for local IP (which means any local IP). - FIXED: Non-working link to YandexDNS on the webui for Russian models. - FIXED: Webui wouldn't notify when running dangerously low on free nvram (feature was lost at some point in the past) - FIXED: Custom clientlist would be wiped if stopping an OpenVPN server instance. - FIXED: Incorrect detection of EUI64 addresses on the IPv6 firewall (would prevent using ::/0 for instance). - FIXED: EUI64 support missing while in Load Balancing or using Multicast IPTV. - FIXED: Asus DDNS failing to update due to an invalid certificate on Asus's server. - FIXED: Let's Encrypt no longer working due to deprecated ACMEv1 protocol usage (backport from GPL 81351) - FIXED: Let's Encrypt support would sometime fail when using Asus DDNS (fixed DNS publishing of validation record) - FIXED: IPv6 neighbour solicitation drop toggle not working for some models 384.13_1 (12-Aug-2019) - FIXED: RT-AC87U failing to boot when configuring in AP mode. 384.13 (31-July-2019) - NEW: AiMesh Router and node support. Note that automatic live update of Merlin-based nodes is not supported, you will have to manually update any Merlin-based nodes when a new firmware is available. Asus-based nodes (which is recommended) will be able to make use of the automatic live update. - NEW: ChaCha20-Poly1305 support in Strongswan (themiron) - UPDATED: RT-AX88U to GPL 384_6210. - UPDATED: Curl 7.65.3. - CHANGED: dhcp_staticlist no longer contains hostnames, these have been moved to dhcp_hostnames for better compatibility with upstream and closed source components, also allows more static leases to be defined before reaching the size limit. - CHANGED: Replace Nettle with OpenSSL for dnsmasq's DNSSEC validation, which opens the door to supporting more ciphers. (themiron) - FIXED: Firmware Update check button would redirect to Asus support site if scheduled checks are disabled. - FIXED: Firefox was showing a no-op Uninstall button on the AiCloud page - FIXED: 5 GHz radio showing as disabled on the Sysinfo page for the RT-AC87U - FIXED: FTP would be accessible from the WAN even while disabled if you had DualWAN load balancing enabled, or IPTV configured. - FIXED: IGMP Snooper daemon crashing when more than 32 hosts are present (themiron) - FIXED: External DDNS IP checker would fail for Chinese users, as checkip.dyndns.org is blocked - switched to .com TLD. - FIXED: Devices without a networkmap-defined alias wouldn't fallback to their hostname on some webui pages like the IPTraffic and QoS Classification pages. - FIXED: Remote IP field filtering on Classification page wasn't working. - FIXED: Incorrect user permissions displayed on the FTP page. - FIXED: Performance issues for some users, following the kernel security fixes in 384.12. (gzenux) 384.12 (22-June-2019) - NOTE: The project now has its own domain name. Official website is now https://www.asuswrt-merlin.net/ and my email address for anything related to the project is now [email protected]. - NEW: Added WS-Discovery support. This allows Windows clients to detect the router's shared USB drives even if SMBv1 support is disabled. - NEW: Re-added option to extend the WAN's TTL (from stock firmware, was previously disabled as it used to be broken) - UPDATED: RT-AC3200 and RT-AC87U to 382_51640/51634 binary blobs (with a few exceptions for 384_xxxx compatibility) - UPDATED: Merged GPL 384_45717 (except for RT-AX88U) - UPDATED: Nano 4.2. - UPDATED: OpenSSL-11 to 1.1.1c. - UPDATED: OpenSSL-10 to 1.0.2s. - UPDATED: curl 7.65.1. - UPDATED: miniupnpd 20190604. - CHANGED: Local clients will be shown by their hostname on the Classification page. - CHANGED: Reworked handling of up/down events in OpenVPN. Server instance will now also use its own updown script, which will handle firing up openvpn-event (if present). - CHANGED: Inbound traffic sent to you through an OpenVPN client will now be dropped by default. This can be changed through the new "Inbound Firewall" parameter found on the OpenVPN client page. You should only change this to "Allow" if running a site2site tunnel with a trusted remote server, or if you do expect traffic to be forwarded to you through the tunnel. - CHANGED: The router will now use ISP-provided resolvers instead of local dnsmasq when attempting to resolve addresses, for improved reliability. This reproduces how stock firmware behaves. This only affects name resolution done by the router itself, not by the LAN clients. The behaviour can still be changed on the Tools -> Other Settings page. - CHANGED: Randomize the serial number of certificates generated by the router for its httpd. If using a router-generated certificate, then it's recommended to generate a new one. - CHANGED: Allow USB idle values up to 9999. - CHANGED: Replaced Network Analysis and Netstat pages (under Network Tools) with new versions based on Asus's Netool daemon for non-HND models, but based around the more limited traceroute busybox applet. RT-AC86U and RT-AX88U still use the newer traceroute executable. - CHANGED: Reworked how some services are started when the WAN interface comes up to prevent deadlocks between the WAN completing its initialisation, and the clock getting set. These could result is fairly long boot time for some ISPs. - FIXED: openvpn-event script not launching if the client was configured in Secret Key auth mode. - FIXED: IPv6 issues on RT-AX88U - backported accept_ra fix from 45717 (themiron) - FIXED: Memory leak in erp_monitor process. - FIXED: Page redirection failing to apply at boot time if WAN was down. - FIXED: CVE-2019-11477, CVE-2019-11478 and CVE-2019-11479 (themiron) 384.11_2 (18-May-2019) - NEW: Implemented source/destination IP filtering for the Netool version of Netstat web page. - CHANGED: Backported multiple fixes and improvements for ntpd from upstream, improving handling of failed server hostname resolution, and better clock sync discipline. - FIXED: RT-AC88U/3100/5300 were accidentally compiled with Netool enabled, which isn't compatible with these model's kernel. - FIXED: Movistar stopped working for some users. Re-disabled udpxy on Movistar profile for now. A more complete fix will have to come from Asus. - FIXED: Re-disabled memaccess debugging tool, as it creates a symlink called "sh" which is a pretty bad idea from Broadcom. (RT-AC86U, RT-AX88U) 384.11 (8-May-2019) - NEW: Added DNS Privacy feature, with support for DNS-over-TLS (also known as DoT). You can configure it on the WAN -> Internet Connection page. You can manually add your own servers, or chose one (or a few) from the preset list. (themiron) - NEW: NTP daemon on the router, to allow your LAN clients to synchronize their clocks with it. - NEW: Option to intercept NTP requests from clients, and redirect them to the router's own NTP daemon. - NEW: Added service-event-end custom script, executed at the end of an rc service call. Receives the same arguments as service-event, but is a non-blocking script. - NEW: Added sqlite3 CLI command, to allow script authors to create/manage their own sqlite3 database - UPDATED: RT-AX88U to 384_5951 GPL. - UPDATED: Other models to 384_45713 GPL (RT-AC87U, RT-AC3200 and RT-AC5300 still using 384_45149 binary blobs) - UPDATED: Nano 4.0. - UPDATED: Curl 7.64.1. - UPDATED: Dropbear 2019.78. - CHANGED: Replaced the custom ntpclient with a proper ntpd implementation, for reduced memory usage and increased accuracy. - CHANGED: Made the secondary NTP server configurable through the webui. Note that ntpd will use both servers, so clear the second server if there is one and you don't want to use it. - CHANGED: Re-designed firmware upgrade page, moving the schedule option to that page, and removed support for the Beta channel. - CHANGED: Removed popup messages showing on the DDNS page when a service state change was detected. Report it within the page instead. - CHANGED: Report firmware version within the new firmware notification popup that appears at the top of the webui. - CHANGED: Moved LED control (formerly known as Stealth Mode) to the System page. - CHANGED: Do not restart whole network whenever changing an IP reservation on the Networkmap card. - CHANGED: Allow URLs up to 64 chars long on the URL filter. - CHANGED: pre-mount user script now receives the filesystem as second argument. - CHANGED: Moved various DNS-related settings from the DHCP page to a more appropriate location on the WAN page. - CHANGED: OpenSSL default dir moved to /etc/ssl/. Allows programs to automatically locate the CA bundle without requiring explicit configuration. - CHANGED: Optimized service restarts generated by the System page. - CHANGED: Replaced Network Analysis and Netstat pages (under Network Tools) with new versions based on Asus's Netool daemon (RT-AC86U, RT-AX88U) - FIXED: Reboot scheduler would sometime get stuck, or corrupt plugged USB drives. Now doing a more thorough shutdown of services, should hopefully make it more reliable. - FIXED: CVE-2019-1543 issue with Chacha20-poly1305 in OpenSSL 1.1 (themiron) - FIXED: Client count on the Sysinfo page was missing Guest clients - FIXED: Miniupnpd sometimes sending ssdp notifies to the wrong interface (themiron) - FIXED: udpxy not working when using the Movistar IPTV profile on RT-AC86U and RT-AX88U. 384.10_2 (3-Apr-2019) - CHANGED: Increased OpenVPN interface queue length from 100 to 1000 bytes, to reduce the amount of dropped packets if router can't keep up. - CHANGED: Updated CA bundle to January 23rd version - FIXED: Moviestar VLAN routes weren't properly configured (broken quagga configuration) - FIXED: Layout issues on the Wireless Log page for some models - FIXED: Missing tooltip content for the new local DNS resolution setting on the Tweak page - FIXED: FAQ URL on Bandwidth Monitor points to a non-existing page on Asus's servers (point to old page for now) - FIXED: OpenVPN CA would be overwritten if there was no server key or cert present - only generate them if all three are missing. - FIXED: Bandwidth Limiter not working properly in some cases, as it failed to disable hardware acceleration 384.10 (24-March-2019) - NEW: Added OpenSSL 1.1.1b in parallel to 1.0.2. Some services like AiCloud are still linked against 1.0.2 because they would require Asus to recompile them against 1.1.1. Main services that currently use OpenSSL 1.1.1: httpd (webui), OpenVPN, wget, net-snmp, Tor, Strongswan (IPSEC server), inadyn, vsftpd, avahi. Models that lack AES acceleration will prioritize the use of CHACHA20 over AES-256-GCM, for a small performance improvement (for instance with the webui). Note that OpenVPN 2.4.7's support is still limited. TLS 1.3 is supported, but CHACHA20 support is only expected with OpenVPN 2.5.0. The 1.0.2 userspace tool is still named "openssl", while the 1.1.x version is named "openssl11". - NEW: Updated RT-AX88U to GPL 384_5640. - NEW: Implemented lcp-ident option in PPP (required by some ISPs) (Themiron). - NEW: Added NFSv2 support to HND models. - NEW: You can now choose between having your router do internal DNS queries locally (through dnsmasq) or with your WAN configured DNS (like stock firmware). This does not affect DNS lookups from your clients, only those made by the router itself. The option is under Tools -> Other Settings. (Themiron) - CHANGED: Some firmware cleanups to regain flash space (for use with the parallel OpenSSL 1.1.x install) (RMerlin, Themiron) - CHANGED: Updated curl to 7.64.0. - CHANGED: Updated OpenVPN to 2.4.7. - CHANGED: Updated Tor to 0.3.5.8. - CHANGED: Updated strongswan to 5.7.2. - CHANGED: Updated OpenSSL 1.0.x to 1.0.2r. - CHANGED: Updated dnsmasq to 2.80-44-g608aa9f (Themiron) - CHANGED: Re-worked the Classification page. New design is much faster, allows filtering, and shows additional info when hovering on a field. Thanks to FreshJr for giving me the motivation to spend more time on it. - CHANGED: Strongswan is no longer compiled 64-bit on HND, allowing it to use a shared openssl library instead of a static one. This should significantly reduce the memory and flash usage of Strongswan. (Themiron) - CHANGED: Reworked DNS WAN probe implementation (Themiron) - FIXED: IPSEC log display wasn't properly formatted (showed entirely on a single line) - FIXED: Compatibility issues between recent Tuxera NTFS driver and Samba - FIXED: NFSv2 support - FIXED: PPP host-uniq support (Themiron) - FIXED: AiCloud not working on the RT-AX88U - FIXED: OpenVPN key/certs would sometime end up in nvram in addition to in /jffs - FIXED: Couldn't remove an existing OpenVPN key/cert by clearing the field on the webui - FIXED: Resetting OpenVPN client to Default values wasn't removing any existing Extra CA certificate - REMOVED: Beceem Wimax driver. This is deprecated, and was already removed from the HND models. This allows to reclaim close to 2 MB of flash space. - REMOVED: CFB and OFB ciphers from OpenVPN client 384.9 (2-Feb-2019) - NEW: Temporarily reorganized code in separate branches, to handle Asus's currently scattered firmware source code releases. The GPL situation for this release is as follow: o RT-AX88U: Merged GPL 384_5329 o Other models: Merged GPL 384_45149. o Special binary blobs provided by Asus for the RT-AC87U and RT-AC3200 (compatible with 384_45149). - NEW: Added NFS client support (V2 and V3) to the RT-AC86U and RT-AX88U (already present in older models) - NEW: Report the number of spatial streams and the PHY type used by wireless clients for models supporting it - NEW: Display tracked connections on the QoS Stats page (now relabeled "Classification"). Fields can be sorted by clicking on the column headers. Thanks to FreshJr for his help in deciphering the packet mark values. - NEW: Implemented ipsec.postconf and strongswan.postconf scripts. - KNOWN ISSUE: dcd process crashing on RT-AC86U (bug in Trend Micro's code, outside of my control). - KNOWN ISSUE: IPv6s on Tracked Connections have their last two bytes set to 00 (bug in Trend Micro's code truncating the last two bytes). - KNOWN ISSUE: No IPS events logged (bug in Asus's code, IPS should work, just fails to log hits) - KNOWN ISSUE: Networkmap listing may be unreliable. (Bug in Asus's code) - KNOWN ISSUE: Users failing to read changelogs will probably complain about the above issues. (Outside of my control). - CHANGED: Updated wget to 1.20. - CHANGED: Updated nano to 3.2. - CHANGED: Updated curl to 7.62.0. - CHANGED: Updated Chart.js to 2.7.3. - CHANGED: Updated dnsmasq to 2.80-32-g28cfe36 (themiron) - CHANGED: Optimized some JS files to reduce their size - CHANGED: OpenVPN clients can now accept CNs up to 255 chars when using it to validate the certificate. - CHANGED: No longer reset the OpenVPN client's description, policy mode and existing rules when uploading an .ovpn config file. - CHANGED: No longer accept any server-provided route when OpenVPN client set to Policy (Strict). - CHANGED: Clients bound to DNSFilter rules will no longer bypass it by using DoT. DNSFilter servers that support DoT (like Quad9) will only allow filtered clients to use that server - FIXED: Firmware update checks would not run at boot time on the RT-AX88U. - FIXED: Name resolution issues for /etc/hosts entries on HND models (themiron) - FIXED: Syslog not properly copied to JFFS on reboot (John Bacho) - FIXED: Volumes not properly unmounted on HND platform (John Bacho) - FIXED: Added missing TEE Netfilter target on the RT-AC86U - FIXED: SSH brute force protection didn't work in Dual WAN load balancing mode. - FIXED: httpd crashes on RT-AC86U (themiron) - FIXED: DNSFilter clients could use a different nameserver when using an IPv6 connection - FIXED: USB disk idle config changes not applying without a reboot. - FIXED: "Strict" DNS mode wasn't working properly with OpenVPN clients - FIXED: Cannot upload JFFS backup on HND models 384.8_2 (8-Dec-2018) - CHANGED: Updated miniupnpd to 20181205. - CHANGED: Push LAN domain to OpenVPN clients as DNS suffix for the connection. - FIXED: Cannot save custom settings on OpenVPN server page on non-HND models. - FIXED: Some webui pages fail to load properly in French - FIXED: dnsmasq fails to start when certain options are configured (themiron) - FIXED: Non-functionnal Show Password option on OpenVPN/PPTP server page for RT-AX88U (removed) - FIXED: Persistent SSL cert was wiped at boot time in some specific scenarios. 384.8 (2-Dec-2018) - NOTE: Asus has put the RT-AC56U on their End of Life list, meaning no further firmware releases from them. Since it's impossible for me to support models without matching GPL releases from Asus, I also have to retire the RT-AC56U. 384.6 is the final release for that model. - NOTE: The RT-AC3200 and RT-AC87U are not supported by this release, Asus hasn't released any updated code yet for these models. - NEW: Added RT-AX88U support (based on GPL 384_4736). - NEW: Merged with GPL + binary blobs from 384_32799 (all supported models except RT-AX88U) - NEW: Add LZ4 V2 option to OpenVPN compression (more effective at handling already compressed data) - NEW: Added "extend" support to SNMP. - NEW: Added CleanBrowsing to DNSFilter supported services. - NEW: Webui HTTP LAN port can now be changed from the default 80. - NEW: Added support for the Netfilter TEE target. - CHANGED: Removed watchdog from OpenVPN clients, to avoid conflicting with more advanced configurations. - CHANGED: Vsftpd TLS mode will now reuse the web server certificate (including any Let's Encrypt generated one). - CHANGED: SSL crypto/cipher hardening for httpd (themiron) - CHANGED: Syslog will now ignore bwdpi debug output (themiron) - CHANGED: Reworked Wireless Log page, adding a new button to view low-level details (what stock firmware shows on its Wireless Log page), and removed redundant option to display DFS channel details. - CHANGED: Update dnsmasq to 2.80-11-g59e4703 (themiron) - CHANGED: Updated nettle to 3.4 - CHANGED: Updated net-snmp to 5.8 - CHANGED: Updated openssl to 1.0.2q - CHANGED: Migrated /jffs/ssl/* content to /jffs/.cert (to share the same folder used by Asus stock) - CHANGED: Re-enabled WTFast on non-HND models (curl-related crash has been fixed). This is still untested. - CHANGED: Updated CA bundle to October 17th 2018 version. - CHANGED: Support search domains pushed by a remote OpenVPN server - FIXED: UOPNP port forwarding not working in CGNAT/double NAT scenario even if proper ports were forwarded upstream. - FIXED: Pages based on table.js (like the port trigger one) would fail to work properly under Firefox (Michael Ziminsky) - FIXED: Dnsmasq issues when running in non-router mode (John Bacho) - FIXED: Routing issues when in non-router mode (John Bacho) - FIXED: Bug in curl that could cause some applications to crash on non-HND models - FIXED: IFTTT failing to start on non-HND models (caused by curl issue). - FIXED: Webui could complain about port 8080 being reserved for http WAN port (which is no longer supported) - FIXED: Cannot change image for device with a vendor name containing an apostrophe (like Micro-Star int'l) (Asus bug) - FIXED: OpenVPN client download was capped by Adaptive QOS upload limit (fix devised by FreshJR) - FIXED: OpenVPN custom config might be lost after a reboot on the RT-AC86U. 384.7_2 (21-Oct-2018) - FIXED: Namecheap DDNS service not working - FIXED: CVE-2018-15599 security issue in Dropbear - FIXED: Potential buffer overrun in httpd 384.7 (7-Oct-2018) - NOTE: The RT-AC3200 and RT-AC56U are not supported by this release, Asus hasn't released any updated code yet for these models. - NOTE: Important changes to DDNS, please read below. - NOTE: Important changes to DNSFilter, please read below. - NEW: Merged with GPL 384_21152. - NEW: Merged RT-AC87U binary blobs + SDK from 382_50702. - NEW: Replaced old ez-ipupdate DDNS client with In-a-Dyn. A plugin was developed to fully support Asus's DDNS service. Custom services can now be configured through ddns-start, inadyn.conf, inadyn.conf.add or inadyn.postconf. See the In-a-Dyn documentation as many custom services can be defined for it. - NEW: Added support for freedns.afraid.org DDNS service to webui. - NEW: Added option to retrieve WAN IP from either the local interface (like before) or through a remote server (which works through double NAT) for DDNS. - NEW: Display DFS channel info on Wireless Log page. - NEW: Added option to disable checks on unsigned DNSSEC replies. Disabling these will speed up lookups, but it will also remove part of the security benefits of DNSSEC, so it should not be used unless you have a very specific reason to do so. - NEW: Added Quad9 to DNSFilter supported services. - CHANGED: Updated curl to 7.61.1. - CHANGED: Updated wget to 1.19.5. - CHANGED: Updated openssl to 1.0.2p. - CHANGED: Updated dnsmasq to v2.80test8 (themiron). - CHANGED: Updated nano to 3.1. - CHANGED: All DDNS services now use HTTPS. - CHANGED: Replaced Google Domains DDNS script with In-a-Dyn's own plugin. - CHANGED: Moved DNSFilter to the LAN section, to make it clear that it's unrelated to Trend Micro's engine. - CHANGED: Report hostname and IP on Wireless Log page if the info is missing from dnsmasq but available from networkmap. - FIXED: Invalid dnsmasq config when setting DNSFilter to Router mode and having IPv6 enabled (themiron). - FIXED: dnsmasq crashing on RT-AC86U with IPv6 Stateful mode (themiron). - FIXED: client table would be shown twice on the VPN Status page if the only connections to an OVPN server were invalid clients (like a port scanner) - FIXED: DDNS forced updates after "x" days wouldn't be initiated. - FIXED: CERT VU#598349 vulnerability (DHCP client could claim the special "wpad" hostname) - REMOVED: Ez-ipupdate DDNS client (replaced with In-a-Dyn). Update your scripts if you were relying on it. - REMOVED: Norton Safe DNSFilter services (being discontinued by Symantec in November). Configured clients will be automatically migrated to OpenDNS Family - make sure to edit your DNSFIlter settings if you desire to use a different service. 384.6 (25-July-2018) - NOTE: The RT-AC87U is not supported in this release, as Asus hasn't released any updated code for that model. - NEW: Merged with GPL 384_21045/382_50624. - NEW: Added support for the "-p" option to netstat. - NEW: Added setting to enable DNS rebind protection, on the DHCP page. This works by rejecting upstream server responses that would point at a private IP. - CHANGED: Updated nano to 2.9.8 - CHANGED: Updated curl to 7.60.0 (contains security fixes) - CHANGED: Allow selecting text (for copy/paste operations) on AiProtection pages. - CHANGED: Added AES-*-GCM ciphers to the OpenVPN legacy ciphers (so they can be explicitely used without using NCP). - CHANGED: Updated dnsmasq to 2.80test2-17-g51e4eee (themiron) - CHANGED: Since dnsmasq 2.80, dnsmasq now ensures that unsigned DNS replies received with DNSSEC enabled are legitimate. If your upstream DNS doesn't support DNSSEC, this means all replies from signed zones will be considered invalid. Make sure you only enable DNSSEC if your upstream DNS servers do support it. This behaviour is a bit slower, but far more secure than the old default. - CHANGED: Network Tools -> Netstat output also report program/PID - CHANGED: Updated CA bundle to June 20th version. - FIXED: IPv6-related issues on non-HND platform (themiron) - FIXED: Couldn't log on WTFast if accessing the router webui over https. - FIXED: USB modem support code failing to properly pass parameters to the kernel module (themiron) - REMOVED: WTFast support for RT-AC88U/RT-AC3100/RT-AC5300, as it's incompatible with recent versions of curl (and has been broken for quite some time). Not gonna revert back to a 7 years old curl version just for wtfast. 384.5 (13-May-2018) - NEW: Merged withh GPL 384_20648 - NEW: Merged RT-AC68U, RT-AC5300 binary blobs from 384_20648 - NEW: Merged RT-AC86U SDK and binary blobs from 384_20648 - NEW: service-event script, executed before any service call is made. First argument is the event (typically stop, start or restart), second argument is the target (wireless, httpd, etc...). Note that this script will block the execution of the event until it returns. - NEW: Added USB HID modules (for use with devices such as UPS) - NEW: Added ip6tables-save command. - CHANGED: Updated OpenVPN to 2.4.6. - CHANGED: Updated Dropbear to 2018.76. - CHANGED: Updated Openssl to 1.0.2o. - CHANGED: Updated miniupnpd to version 2.1 (20180508). - CHANGED: Updated nano to 2.9.5. - CHANGED: Moved RT-AC86U to the same Busybox version (1.25.1) as other models. - CHANGED: Revised OpenVPN server options: o Removed "TLS Reneg time" (rarely used, can manually be set as a custom option) o Removed "Server Poll" (which didn't work properly), and reimplemented watchdog service, hardcoded to 2 mins frequency. o Removed "Push LAN" and "Redirect Gateway", replaced with new Client Access setting o Removed Firewall setting (firewall rules are now always created, and the broken External mode was fixed and integrated into the new Client Access setting). You can now use the postconf script to override it. o Removed option to respond to DNS queries - enabling the option to Push DNS will also handle it o Added new Client Access setting to select between three types of access: LAN only, WAN only (will block access to the LAN, including the router itself) and LAN + WAN. o Keys and certificates can now be up to 7999 characters long. - CHANGED: Revised OpenVPN client options: o Reorganized settings into groups o Removed "Poll Interval" (which didn't work properly), and reimplemented watchdog service, with a hardcoded frequency of 2 mins. o Removed Firewall setting (firewall rules are now always created). You can now use the postconf script to override it. o Modified behaviour of Connection Retry. Instead of taking a value in seconds that only affected resolution failure, it now takes a number of attempts, and affects connection failures. Resolution failures will now retry for an infinite period of time (the default OpenVPN value). o Added "refresh" link which can be clicked to re-query the public IP endpoint of the tunnel o Keys and certificates can now be up to 7999 characters long. - CHANGED: Removed option to resolve names on the Log -> Connections page. That functionality was added to the Network Tools -> Netstat page instead. - CHANGED: Re-designed Log -> Connections page into a table with sortable fields - click on a column header to sort on that field. - CHANGED: From now on, setting the router to act as a master browser or a WINS server will also require you to enable sharing. This will ensure that users understand that enabling either of these settings requires disk sharing to also be enabled (which it was already silently doing before). - CHANGED: Moved "Beta firmware" option to the Tools -> Other Settings page - CHANGED: Improved layout of the Firmware Update page - CHANGED: WPAD behaviour (sending a carriage return on DHCP option 252) can now be controlled in the Tweaks section. - CHANGED: Blocking custom scripts such as service-event and pre-mount will now wait a maximum of 120 seconds before resuming normal operations, to prevent accidental lockouts. - CHANGED: Autofill start/end time for DST when selecting a timezone (LostFreq) - FIXED: Some dnsmasq issues related to DNSSEC were fixed, including CVE-2017-15107. (backported from dnsmasq 2.79 by John Bacho) - FIXED: Restoring an OpenVPN instance to default values would fail to disable its Start with WAN setting. - FIXED: Hardware authentication failure for the RT-AC3100 and RT-AC5300. - FIXED: Minidlna web status page could no longer be enabled. - FIXED: CVE-2017-9022, CVE-2017-9023 and CVE-2017-11185 in Strongswan (odkrys) - FIXED: Various issues with download traffic in Traditional QoS (Cédric Dufour) - FIXED: TCP timeout values couldn't be changed on the Tools -> Other Settings page. - FIXED: Security issue related to webui logging in (Asus bug) 384.4_2 (24-Mar-2018) - CHANGED: Added visual warning when manually enabling webui access on WAN. Doing so carries serious potential security risks, as Asuswrt's web server code should not be considered hardened enough for this. - FIXED: Security issue in httpd (CVE-2018-8879). - FIXED: Potential security issue in httpd related to QiS. - FIXED: Minor webui issue in the QoS overhead menu. 384.4 (16-Mar-2018) - NEW: Merged with GPL 384_20379 (with some binary components from 382_50010 and 384_20308 depending on models) - NEW: Added support for the RT-AC5300. - NEW: Added support for the RT-AC87U. - NEW: Added IPSEC support to the RT-AC86U. - NEW: Support the new Entware 64-bit repo on the RT-AC86U. To switch to the new repository, re-run the entware-setup.sh script. You will need to reinstall your apps (your old config files are backed up on your USB disk). - CHANGED: Tightened security around some config files. - CHANGED: Allow guest networks settings for AP isolation and SSID broadcast to be set separately from their parent interface (John Bacho) - CHANGED: Samba protocol support can now be set to SMBv1, SMBv2, or SMBv1 + SMBv2 (the new default). This will result in a performance drop on all models but the RT-AC86U, but will be more secure. Ideally, people should change it to SMBv2 only, and then reboot all their client devices to start using only the new protocol. - CHANGED: Re-added some of the logging sd-idle used to do in 380.xx. - CHANGED: Switched to the new Entware repo for armv7 models. To upgrade, run the following commands TWICE: opkg update; opkg upgrade - FIXED: Resetting an OpenVPN client to default settings might revert back after a reboot. - FIXED: log flood from lldpd about "unable to send packet on real device" (moved to debug level) - FIXED: Potential racing condition that could lead to two instances of miniupnpd running at boot time. - FIXED: Single-char hostnames were rejected by DHCP static leasees page. (theMIROn) - FIXED: AiCloud could sometime generate a new SSL certificate that would overwrite the one stored in jffs. Now, AiCloud can also use the same one uploaded by the user for the main webui, or the Let's Encrypt one. - REMOVED: Telnet server. Please use SSH for console-based management. - REMOVED: SNMP support on the RT-AC86U (incompatible) - REMOVED: Merlin NAT loopback mode (was increasingly problematic as the firmware firewall handling became more complex) 384.3 (14-Feb-2018) - NOTE: To reduce confusion following the version bump to 384, the current Github repository was renamed from asuswrt-merlin.382 to asuswrt-merlin.ng (for New Generation). It's recommended that you update your local repository if you're a developer, for example by running: git remote set-url origin \ [email protected]:RMerl/asuswrt-merlin.ng.git - NOTE: AiMesh is currently not supported. Feasability of supporting it is still under evaluation. - NEW: Merged with GPL 384_10007 - NEW: Added support for RT-AC3200 (merged SDK 7.x-main + binary blobs from 382_19466). - NEW: nano can now be configured through /jffs/configs/nanorc - CHANGED: Allow up to 5 OpenVPN clients on RT-AC3200. - CHANGED: Updated nano to 2.9.3. - FIXED: Some routers coming from 380.xx would incorrectly report a new firmware available at boot time. - FIXED: Some broken clients (like Samsung TVs) try to use reserved hostnames - ignore these. (theMIRon) - FIXED: Added missing IPv6 local hostnames (theMIRon) - FIXED: Issues withh DNS & broadcast relay for pptp clients (theMIRon) - FIXED: Fixed CVE-2018-5721 in httpd (Merlin & theMIROn) - FIXED: helper.js wasn't properly handling parentheses (John9527) - FIXED: NAT acceleration of PPPoE for some models (fix backported from 382_50010) - FIXED: Networkmap-related issues on some models (missing tx/rx rate and such). - FIXED: ipset could cause the router to crash on the HND platform (john9527) - FIXED: Network Service Filter wasn't working when in Blacklist mode. - FIXED: Repeater mode (backport from 384_20287) 382.2 Beta (17-Jan-2018) - NOTE: Due to various issues with GPL 382_18991, the 382.2 release is being dropped, and work is moving on to the next version. 382.2 beta releases remain available for those who still wish to use it (especially RT-AC56U users for whom there is no ETA as to when Asus will release the next GPL for that particular model.) Known issues include lack of PPPoE HW acceleration and Adaptive QoS sometimes failing to start at boot among others. - NOTE: The official IRC channel has moved to Freenode (#asuswrt). - NEW: Merged with GPL 382_18991. Most notable changes (will vary between models): - Added IPSec VPN server - Added IFTTT and Alexa support - Let's Encrypt support (DDNS page) - Better support for some longer settings (RT-AC86U) - NEW: Merged HND SDK + binary components from 382_18848 (RT-AC86U) - NEW: Added IPSec VPN status on the VPNStatus page. - NEW: Added support for RT-AC56U and RT-AC68U (and all of its variants) - NEW: Enabled support for Let's Encrypt on RT-AC56U and RT-AC68U (in addition to RT-AC88U/3100) - CHANGED: Moved HTTPS cert management to the DDNS page (where Asus has put theirs, as Let's Encrypt is tied to the DDNS configuration) - CHANGED: Updated openssl to 1.0.2n. - CHANGED: Updated tor to 0.2.9.14. - CHANGED: Updated nano to 2.9.1. - CHANGED: Updated curl to 7.57.0. - CHANGED: Increased max length for OpenVPN custom settings from 170 to 510 characters on RT-AC86U. - CHANGED: Updated miniupnod to Github snapshot 20171212. - CHANGED: OpenVPN firewall rules are now processed after the various security chains (access restriction, network service firewall, etc...), ensuring OVPN traffic no longer bypasses them. - FIXED: httpd crash on certain web pages if there are no Ethernet clients connected - FIXED: DNSFILTER rules would have priority over OPENVPN Client rules (when client has DNS set to Exclusive mode). - FIXED: traffic routing from the router itself would fail when restarting the firewall while using an ovpn client with policy rules in effect. - FIXED: Dashes were rejected when used in an OpenVPN policy client description. - REMOVED: Removed option to select between active and passive scan mode for a site survey (that code is now closed source and therefore that option can no longer be implemented). 382.1_2 (2-Dec-2017) - NEW: Added custom/add/postconf support for mcpd.conf (RT-AC86U) - CHANGED: Updated odhcp6c to latest upstream version (patch by theMIRon) - CHANGED: cifs and xt_set kernel modules will get automatically loaded as needed. - CHANGED: Updated openssl to 1.0.2m. - CHANGED: Updated libogg to 1.3.3 and libvorbis to 1.3.5. - CHANGED: Merged wireless components from GPL 382_18991 for RT-AC88U and RT-AC3100 (should in theory fix KRACK issue on these two models) - FIXED: allow IA_NA mode downgrade with forced IA_PD (for ISPs with broken IPv6 support) (patch by theMIRon) - FIXED: SSH brute force protection would break WAN connectivity (RT-AC86U) - FIXED: Wrong Trend Micro signature updater was used when compiling with FW update checker enabled. - FIXED: QoS Upload chart missing on PPPoE connections with Adaptive QoS enabled. - FIXED: client and vendor id fields on WAN page would fail to accept new values longer than 32 characters. - FIXED: The Desc field in the OpenVPN policy section would reject ":" if field contained a MAC address. - FIXED: Security issues CVE-2017-15275, CVE-2017-12163 and CVE-2017-12150 (backported to Samba 3.6 and 3.5) - FIXED: DHCP static lease list would refuse any change if the list of leases+hostnames was longer than 1000 chars due to an HND platform limitation (RT-AC86U) 382.1 (12-Nov-2017) Asuswrt-Merlin 382 was rebuilt from a clean GPL codebase, as merging the new 382 GPL on top of the existing code proved too difficult. For simplicity, the following abbreviations are used below: AM380 = Asuswrt-Merlin 380.xxx AM382 = Asuswrt-Merlin 382.xxx Asus380 = Asus's 18.104.22.168.380_xxxx Asus382 = Asus's 22.214.171.124.382_xxxx AM382.1 is based on AM380.68_4 merged on top of a clean 126.96.36.199.382_15098 GPL. At this time, only the RT-AC86U, RT-AC88U and RT-AC3100 are supported by AM382. Other models will gradually be moved to AM382 as Asus upgrade them to the new 382 code base (and GPL code becomes available for them). This changelog will focus on changes that happened between AM380.68 and AM382.1, or between Asus382_16466 and AM382. Also note that the primary download site was changed to Sourceforge, due to numerous issues with Mediafire. Onedrive will be the official mirror to the SF.net download site. - NEW: Moved to Asus382 codebase. Some of the most important changes between Asus380 and Asus382: - New Trend Micro DPI engine, with two-way IPS - New networkmap service (now closed source) - New OpenVPN implementation (now closed source, not used by AM382) - Numerous security enhancements throughout the code - NEW: Merged with GPL 382_16466 (RT-AC86U). - NEW: Added support for the RT-AC86U and its Broadcom HND platform (HND SDK from GPL 382_18219). Note that IPTraffic is not supported by this model due to its newer Linux kernel. - NEW: Rewrote part of the OpenVPN implementation, as Asus's own is now closed source. Asuswrt-Merlin's OpenVPN code will now be independent of Asus's. - NEW: Added support for inline CRLs when importing an ovpn file - NEW: Added support for fullcone NAT (RT-AC86U) - NEW: Added WiFi Radar (Broadcom's Visualization app) in the Wireless section. You must enable data collection on its Configuration page for all charts to work properly. (RT-AC86U) - NEW: Added option to disable the Asus NAT tunnel service under Other Settings -> Tweak. Not quite sure what this partly closed source service is for, but it eats a fair amount of CPU and RAM. - NEW: Option on OpenVPN Server page to quickly choose between pushing LAN or LAN + Internet access (ported from Asus382) - NEW: Option to select the bitsize to use (1024 or 2048) when automatically generating the OpenVPN server key/certs (ported from Asus382) - CHANGED: Updated wget to 1.19.2 (fixing connectivity to some TLS 1.2 servers) - CHANGED: SSH host keys are now stored in /jffs/ssl/ rather than nvram. - CHANGED: SMB2 is enabled by default on RT-AC86U (no performance penalty on that platform) - CHANGED: Moved UPnP Secure Mode setting from the Tweaks section to the WAN page, next to other UPnP settings. - CHANGED: Moved "Modify key and certs" link to its own dedicated row and made it a button for improved visibility (OpenVPN client & server pages) - CHANGED: Updated OpenVPN to 2.4.4. - CHANGED: The firmware version check behaviour was slightly changed. The "Get Beta" checkbox will now check both the Beta and the Release channels for new version availability. Automatic scheduled checks will still only check the Release channel. - CHANGED: Layout improvements to the SNMP, Login, and Operation Mode pages (patches by Alin Trăistaru) - CHANGED: Report both the local client IP as well as the public/visible IP on the OpenVPN client page once a client is connected (same info that was already available on the VPN Status page). - CHANGED: Moved Disk spindown settings to the System page, to match with Asus382 which now offers this feature. - REMOVED: Obsolete/exotic HMAC digests for OpenVPN servers (to match with Asus' own supported list) - REMOVED: "Custom" OpenVPN authentication mode (which probably nobody used or even understood).